Its dual-purpose mount sits snug in your camera’s shoe mount, or clips easily onto your camera strap or an item of clothing. The Receiver (RX) You can connect your Wireless GO receiver to a mixing desk or XLR input by using the VXLR+. We tested the Go and found the audio reception of this unit to be outstanding. The Rode Wireless GO comes with a full Australian warranty from Rode Australia. RØDE Microphones products are available in stores all over the world. You can attach both receivers to the cold shoe of your camera using the DCS-1 dual cold shoe mount. The TX works as a stylish clip-on microphone or as the world’s smallest beltpack for a RØDE lavalier microphone – perfect for content creation, filmmaking, to-camera or onstage presentation, vlogging, YouTubing, streaming and more. You could also use the SC2 cable (included 3.5mm TRS to TRS coiled cable) with the SC4 adapter, which will convert your input from TRS to TRRS. The Wireless GO system is the epitome of a ‘small wireless microphone’. Both the microphone/transmitter (TX) and receiver (RX) weigh only 31g each. Cela le rend encore plus facile à dissimuler lorsqu'il est placé sur des vêtements de couleurs claires ou dans des environnements très lumineux. Wireless GO is an ultra-compact digital wireless microphone system which is unique in its clip’n’go versatility, incredibly compact form-factor, and unmatched price accessibility. The smartLav+ will require the SC 3 adaptor cable. The TX works as a stylish clip-on microphone or as the world’s smallest beltpack for a RØDE lavalier microphone – perfect for content creation, filmmaking, to-camera or onstage presentation, vlogging, YouTubing, streaming and more. The Wireless GO is compatible with all of RØDE's lavalier microphones. Additional adaptors may be needed in newer smartphone models to allow a 3.5mm input. With the Wireless GO, content creators can worry less about complicated technical set-up and concentrate on what they care about – filming great content. Wireless GO – Également disponible en blanc. The Rode Wireless Go is the baby brother of the Rodelink Filmmaker. The transmitter works as both a clip-on mic or as the world’s smallest beltpack for a RØDE lavalier, sending crystal clear broadcast-grade audio via 2.4GHz digital transmission to the ultra-compact on-camera receiver. How many Wireless GO sets can be used simultaneously? Which lapel microphones are compatible with the Wireless GO? By continuing to use our site, you accept our, Introducing the Wireless GO White, Lavalier GO White, Interview GO and MagClip GO, Features and Specifications of the Interview GO and MagClip GO. Both the microphone/transmitter (TX) and receiver (RX) weigh only 31g each. For the best experience on our site, be sure to turn on Javascript in your browser. In fact, we feel that you could, for example, put the receiver on a coffee table and have several participants seated and still get great audio of all of the speakers. It works tucked discretely under the fabric or as a cool “tech-cessory” on display. Le clip rapide à utiliser du Wireless GO le rend indispensable pour tout journaliste ou vlogger qui fait du run and gun sur le terrain : ne ratez aucune action, et profitez du sans-fil et d'un superbe son. JavaScript seems to be disabled in your browser. The receiver will connect to a smartphones 3.5mm TRRS input with an SC7 cable. Rode SC7 TRS to TRRS Patch Cable for VideoMic GO & Wireless GO, Rode SC3 3.5mm TRRS to TRS adapter for SmartLav+, Rode SmartLav+ Lapel Microphone for Smartphones, Operates as a clip-on microphone or beltpack transmitter for a lavalier/headset microphone, Built-in omnidirectional condenser microphone delivers broadcast-quality sound, All-new Series III 2.4GHz digital wireless transmission with 128-bit encryption designed to deliver crystal clear audio under any conditions, even in locations with dense Wi-Fi and Bluetooth activity like shopping malls, conventions, hotels etc, Up to 70m range (line-of-sight), but optimised for shorter-range operation in congested radio-frequency environments, TX and RX have built-in rechargeable batteries, charged via USB-C, Up to 7 hours on a full charge, including a battery-saver mode, Super-lightweight and ultra-compact: TX is 31g and RX only 31g, The transmitter and receiver pair in just 3 seconds, RØDE’s market-leading smartLav+ (with an SC3 adaptor), Lavalier microphone and HS2 headset microphone are perfect companions for the Wireless GO when used as a beltpack (and sold separately), Wireless GOCompact Wireless Microphone System. L'idéal pour les réalisateurs de films dont les sujets portent régulièrement des vêtements clairs, les vidéastes de mariage, les réunions professionnelles, les shootings, les interviews... Up to 8 Wireless Go sets can be used at the same time in the same location. The Transmitter (TX) Skip to the beginning of the images gallery. The Lavalier GO and RØDELink Lav will connect directly to the Wireless GO transmitters TRS input. The smartLav+ will require the SC3 adaptor cable. How do I connect the Wireless GO to my computer/laptop? If you wish to use the Wireless Go with the Smartlav, you will also need a SC3 .. links on this page. You can only pair one transmitter per receiver at a time. Plug the RX into your camera or recorder via the 3.5mm TRS output cable and tailor the output to your camera or recorder with the 3-stage gain control. Inbuilt Li-po battery rechargeable via USB, 3.5mm TRS lavalier microphone input (transmitter), (For firmware update only) macOS 10.11 above Windows 10 and above, 2 x fur windshield, 1 x pouch, 2 x USB-A to USB-C cables, 1 x SC2 cable, © 2020 RØDE Microphones. The Wireless GO’s quick clip-on capabilities make it perfect for run-and-gun journalists and vloggers in the field: never miss the action as it happens – no cables and great sound. Can I pair more than one transmitter to a receiver? If you have a VideoMic (Go/Pro/Pro Plus) you will need a SC7 to go to your iphone and you will need an iPhone lightning connector (that came with your phone) or your iPhone is like mine with 3.5mm mic jack. How do I connect the receiver to my smartphone? The RX is just as compact, measuring only 44mm x 46.4mm x 18.5mm and weighing only 31g, which makes your rig that much easier to carry and facilitates mounting on a range of camera gimbals and stabilisers. C'est la solution de microphone sans-fil idéale pour les créateurs de contenu dans tous les domaines : réalisateurs de films, présentateurs, journalistes, vloggers et bien d'autres encore. The Wireless GO RX is ultra-compact and super-lightweight, making your rig that much easier to carry. This also applies to tablets. There is also a three-stage output pad – 0dB, -6dB, -12dB – to tailor your output to your camera or recorder. Even putting the microphone on a back jeans pocket did little if at all to impact the audio. Can I pair more than one transmitter to a receiver? Can I connect the Wireless GO to a mixing desk or XLR input? Ultra-compact avec ses dimensions 44 mm x 45,3 mm x 18,5 mm et son poids de simplement 31 g, l'émetteur du Wireless GO fonctionne aussi bien comme un microphone sans-fil rapide et facile à clipser grâce à sa capsule à condensateur omnidirectionnelle intégrée, ou en tant qu'émetteur de poche le plus petit au monde pour un micro-cravate via l'entrée TRS 3,5 mm.